Valspar® Professional Exterior Paint

This is an exterior 100% acrylic latex paint developed to provide outstanding durability, fade resistance and mildew resistance. It can be applied at temperatures as low as 35° F allowing you to extend the painting season. Professional Exterior Flat provides a smooth, uniform finish with spray, brush or roller application and can be applied to a variety of exterior surfaces: Wood and metal siding, trim including hardboard, fiber cement board, vinyl, shakes, primed metal, brick, cement, cinder block and stucco.

  • Contractor quality
  • 100% acrylic latex
  • Maximum hide
  • Low temperature application

Coverage

350 ft²/gal - 450 ft²/gal


AVAILABLE AT INDEPENDENT RETAILERS

HOW TO USE

  • Usage
    Properly prepared exterior wood and metal siding and trim including hardboard, fiber cement board, vinyl, primed metal, shakes, brick, cement, cinder block and stucco. Do not use on glazed brick, floors or steps.
  • Prep
    Thoroughly clean the surface and allow to dry. Remove all wax, grease, dirt, chalk, mildew, loose and peeling paint, and other foreign matter. Remove gloss from shiny surfaces. Fill all cracks and joints with Acrylic caulk before top coating. Remove any powdery dust and efflorescence. New or bare surfaces should be primed with an appropriate Valspar primer.
  • Application
    Stir paint thoroughly. Intermix containers to ensure uniform color. Apply with a premiumquality roller, polyester brush or airless sprayer. Paint the ceiling first, then the walls. If applying by roller, roll from dry area into wet area using firm, crisscross strokes. Finish with long, even strokes in one direction. Note: Some deep or bright colors may require an additional coat to obtain complete hide. Surface conditions and application technique can also impact coverage.
  • Dry Time
    Dry Time @ 77 °F and 50 % Relative Humidity
    To The Touch: 1 hour - 24 hour
    Recoat: 4 hour
  • Clean-up & Disposal
    Clean up with warm, soapy water.
Application Temperature
35 - 90 °F
Recommended Coats
1, 2 coats
Dry To the Touch*
1 hour - 24 hour
Recoat*
4 hour
*Dry Time @ 77 °F and 50 % Relative Humidity
Related Article
HOW TO GET THE BEST PAINT COVERAGE
How to Choose a Color

Data Sheets

Download the product data sheet (PDS) and safety data sheet (SDS) for your Valspar professional exterior paint.

Ratings & Reviews