Valspar® StormCoat® Exterior Paint

This is a 100% acrylic, professional-quality, exterior latex paint developed to resist cracking and peeling. It can be applied at temperatures as low as 35 °F, allowing you to extend the painting season. It provides a smooth, uniform finish with spray, brush or roller application and can be applied to a variety of exterior surfaces: wood and metal siding, trim including hardboard, fiber cement board, vinyl, shakes, primed metal, brick, cement and cured cinder block and stucco.

  • 100% Acrylic resists cracking and peeling
  • Good hide and coverage
  • Low-temp application, down to 35°F
  • Easy to apply - spray, brush or roll
  • Rain-Ready Technology® Ready in just 2.5 hours - guards the freshly painted surfaces from runs, blisters or water marks once rain showers begin
  • Provides a mildew-resistant coating
  • Soap and water cleanup
  • 15 YEAR LIMITED WARRANTY

Sheens

Flat, Satin, Semi-Gloss

Sizes

1 Gallon, 5 Gallon


Coverage

350 ft²/gal - 450 ft²/gal


AVAILABLE AT LOWE'S
Free store pick up

HOW TO USE

  • Usage
    Best for walls and siding, this product applies easily to properly prepared and primed wood, drywall and vinyl or aluminum siding, as well as properly cured stucco, concrete or cement composition siding/panels.
  • Prep
    Thoroughly clean the surface and allow to dry. Remove all wax, grease, dirt, chalk, mildew, loose and peeling paint, and other foreign matter. Remove gloss from shiny surfaces. Fill all cracks and joints with Acrylic caulk before top coating. Remove any powdery dust and efflorescence. New or bare surfaces should be primed with an appropriate Valspar® primer.
  • Application
    Stir paint thoroughly. Intermix containers to ensure uniform color. Apply with a premium-quality roller, polyester brush or airless sprayer. Paint the ceiling first, then the walls. If applying by roller, roll from dry area into wet area using firm, crisscross strokes. Finish with long, even strokes in one direction. Note: Some deep or bright colors may require an additional coat to obtain complete hide. Surface conditions and application technique can also impact coverage.
  • Dry Time
    Dry Time @ 77 °F and 50 % Relative Humidity
    To The Touch: 1 hour - 2 hour
    Recoat: 4 hour - 24 hour
  • Clean-up & Disposal
    Clean up with warm, soapy water
Application Temperature
35 - 90 °F
Recommended Coats
2 coats
Dry To the Touch*
1 hour - 2 hour
Recoat*
4 hour - 24 hour
*Dry Time @ 77 °F and 50 % Relative Humidity
Related Article
HOW TO GET THE BEST PAINT COVERAGE
How to Choose a Color

Data Sheets

Download the product data sheet (PDS) and safety data sheet (SDS) for your Valspar stormcoat exterior paint.

Product Number Sheen Base/Color Container Size SDS PDS
042397594571 Flat High Hide White 1 Gallon SDS PDS
042397594588 Flat White Base 1 Gallon SDS PDS
042397594601 Flat Base 4 1 Gallon SDS PDS
042397594625 Flat White Base 5 Gallon SDS PDS
042397594649 Flat Base 4 5 Gallon SDS PDS
042397594656 Satin High Hide White 1 Gallon SDS PDS
042397594663 Satin White Base 1 Gallon SDS PDS
042397594687 Satin Base 4 1 Gallon SDS PDS
042397594700 Satin White Base 5 Gallon SDS PDS
042397594724 Satin Base 4 5 Gallon SDS PDS
042397594731 Semi-Gloss High Hide White 1 Gallon SDS PDS
042397594748 Semi-Gloss White Base 1 Gallon SDS PDS
042397594762 Semi-Gloss Base C 1 Gallon SDS PDS
042397594779 Semi-Gloss High Hide White 5 Gallon SDS PDS
042397594786 Semi-Gloss Pastel Base 5 Gallon SDS PDS
042397594809 Semi-Gloss Neutral Base 5 Gallon SDS PDS

Ratings & Reviews