HOW TO USE

• Usage
  Properly prepared interior, commercial-ceiling surfaces of plaster, masonry, wallboard, metal and wood.
• Prep
  Clean the surface thoroughly to remove surface contamination, mildew, stains and rust with an appropriate cleaner. Scrape off any loose or peeling paint. Spot prime when needed. Remove gloss from shiny surfaces with light sanding. Prime with an appropriate Valspar® primer. All bare wood must be primed with a Valspar® latex primer or undercoater. For a smoother final appearance on wallboard, prime with a Valspar® interior latex primer.
• Application
  Use a paint paddle or mixing blade to stir paint thoroughly, bringing pigments to the top of the can. To ensure uniform color, intermix all cans of the same color. Recommended application is with airless spray but product may be brushed or rolled as needed. Under normal conditions (77ºF and 50% Relative Humidity) overspray will dry to a harmless dust after a drop of 10 feet. Lower temperatures or higher humidity will require a longer drop distance. Coverage varies depending on the substrate and texture. Adjust fan width, atomization and gun distance from the surface to prevent curtaining while allowing maximum solvent release.
• Dry Time
  Dry Time @ 77 °F and 50 % Relative Humidity
  To The Touch: 30 minute - 1 hour
  Recoat: 1 hour
• Clean-up & Disposal
  Clean up with warm, soapy water.