Valspar Ultra™ Exterior Masonry & Stucco Paint is a superior-quality paint formulated to offer the ultimate weather defense.
Find your Material Safety Data Sheet for your Valspar products.
Where To Use
Use Valspar Ultra™ Exterior Masonry & Stucco Paint on properly prepared exterior surfaces, including:
Brick, cement, fiber cement board
Concrete and stone
Wood siding and trim
Do not use on glazed brick, floors or steps.
One gallon will cover 350-400 square feet, depending on surface porosity.
Preparing Your Surfaces
Clean and dry surface thoroughly, removing all dirt, dust, chalk, rust, grease, wax and mildew. Patch all cracks with appropriate patching compound. If powdery dust or efflorescence is present, remove it and repair the source of water entry (cracked parapet cap tiles, open joints, cracks, etc.) before painting.
Concrete Block/Cinder Block
Fill pores of bare concrete block with latex block filler, then top coat. Block filler must always be top coated for exterior uses.
Must be clean, dry, thoroughly cured and in good condition. Soft concrete or masonry surfaces should be primed with this product.
Paint Like A Pro
Here you'll find step-by-step instructions, how-to videos and articles for projects inside and outside the house.
Pick the perfect finish
There are certain rules of thumb you'll want to follow. Here's a general guideline.
Choose a Paint Finish
Valspar® Latex Exterior Primer
Best for Exterior Durability
Gives a mildew-resistant coating
For fiber cement siding, concrete block and masonry, bare or painted wood, and aluminum or vinyl gutters and downspouts
Low odor, low VOC
Valspar® Tintable Exterior Primer
Accurate final color in fewer coats
Colors look crisp, bright, bold
Uniform final appearance
Superior hiding primer
Saves time and money
Low odor, low VOC
Available at Lowe's®
We'll help you find what you need for your project.