Find a Retailer
Purchase Samples
 
 
 
 
Search The Product Library
search now
 
 
 
Latex Porch and Floor
Paint Enamel
  • Non-glare, low sheen paint
  • Gives floors tough, long-lasting protection
  • Durable and weather resistant
  • Easy water clean up
  • Low odor, low VOC
Features
Interior/Exterior Latex Porch and Floor Paint Enamel is a non-glare, very low sheen acrylic coating which gives floors tough, long-lasting protection. The latex formula is ideal for indoor applications where low odor and fast dry are important. Durable and weather resistant, this enamel lasts for years in exterior applications. Easy water clean up.
 
Product Details
 
 
 
 
 
MSDS
 
Find your Material Safety Data Sheet for your Valspar products.
 
 
 
Where To Use

Properly prepared concrete, wood, porches, basement floors, stairs, breezeways, primed metal, indoor and outdoor floors. Not for use on exterior wood decks, garage floors or other automobile parking areas.

 
Coverage
One gallon of paint covers up to 400 sq. ft. depending upon surface porosity. For surfaces that do require two coats, such as new concrete or badly worn areas, thin first coat only with 1 pint water per gallon of paint; apply second coat as normal.
Paint Calculator
 
Preparing Your Surfaces

The surface must be clean, dry and free of all loose, peeling or cracking paint. Thoroughly clean surface and remove wax and grease with an all-purpose cleaner (TSP or substitute), scouring powder, wax remover or diluted ammonia. Wire brush or scrape chipped or peeling paint. Rough or repaired wood surfaces should be sanded smooth. Prime bare, new wood with an enamel undercoater. Prime badly worn spots on old wood with a thinned first coat of Latex Porch and Floor Enamel. All rust must be removed from metal prior to painting. Prime all iron and steel with a rust inhibiting metal primer. Remove gloss from previously painted surfaces with gloss remover or by sanding. For new concrete, allow surface to cure at least 60 days before painting. Then, acid etch with muriatic acid (See etching instructions and read all cautions on etching packages). Unpainted or smooth-worn concrete should also be etched. After acid etching, apply two coats of Latex Porch and Floor Enamel - the first coat thinned with 1 pint water per gallon of paint.

 
Warning!
If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
 
Paint Like A Pro
Here you'll find step-by-step instructions, how-to videos and articles for projects inside and outside the house.
Learn more
 
Pick the perfect finish
There are certain rules of thumb you'll want to follow. Here's a general guideline.
Choose a Paint Finish
 
Clean Air Formula
All Valspar paints and primers designated Clean Air Formula are non-toxic and low VOC with low odor output.
 
RELATED PRODUCTS
 
Latex House and Trim Primer
  • 100% acrylic resin
  • Superior adhesion
  • Seals surface
  • Extends life of top coat
  • Gives a mildew-resistant coating
  • Low odor, low VOC
 
Learn More
 
Oil Porch and Floor Enamel
  • Long lasting floor protection
  • Extremely durable paint
  • Enamel resists scuffing
  • Suitable for interior and exterior uses
 
Learn More
Product Finder
We’ll help you find what you need for your project.
Begin Searching
 
Order a Sample
Have paint samples delivered right to your door.
Visit Sample Store