|
- Bonds chalky residue to substrate
- Alkali resistant up to 13 pH
- Prevents top coat alkali burn and delamination
- Seals new masonry after 7 days
- Vertical surfaces only
- For interior and exterior use
|
Features
Valspar Masonry and Stucco Sealer and Conditioner is specifically formulated to seal interior and exterior above grade masonry, stucco, and concrete substrates. This 100% acrylic coating allows new stucco, concrete, and other cementitious surfaces to be coated after a 7 day cure, and will adhere to new or existing concrete with a ph of 6 to 13. Also use to bind chalky residue on exterior siding to prevent topcoat peeling. For use on vertical surfaces only.
Where To Use
Properly prepared, masonry-all surfaces including brick, cement, fiber cement board, cinder block, stucco, concrete and stone. Do not use on glazed brick, floors or steps.
Coverage
200-300 sq. ft. per gallon (18-28 m2 per 3.78 L) depending on surface porosity. Do not thin.
Paint Calculator

SDS Information
Find your Safety Data Sheet information for your Valspar products.
|
 |
|
 |
 |
|
 |
|
Product Finder
We'll help you find what you need for your project.
Begin Searching
|
|
|
|
|
 |
|
 |
|
|
|