Interior Products
 
Exterior Products
 
Small Projects
 
Stains
 
Concrete and Floor
Contractor Products
 
 
 
Search The Product Library
search now
 
 
 
Climate Zone® Premium Exterior
Latex Paint

  • Superior durability
  • Resists chalking and yellowing
  • Gives a mildew-resistant finish
Features

Climate Zone® Premium Exterior Latex House and Trim paint protects and beautifies your home, providing a durable accent finish that's easy to clean. It won't chalk, yellow or fade with age.

*Valspar received the highest numerical score among Exterior Paints in the J.D. Power 2017 Paint Satisfaction Study based on 3,139 responses from 12 companies measuring experiences and perceptions of customers surveyed February-March 2017. Your experiences may vary. Visit jdpower.com

 
Where To Use
Ideal for wood siding and trim, hardboard siding, fiber-cement board, primed metal, shakes and asbestos shingles, stucco, stone, brick, cinder block, concrete plus steel, aluminum and vinyl siding.
 
Coverage
One gallon of paint covers up to 400 square feet.
Paint Calculator
 
Preparing Your Surfaces

Before you paint clean, and dry the surface thoroughly, removing all dirt, dust, rust and grease. On bare wood, coat knots and sappy areas with stain block primer/sealer. Then prime entire surface with exterior oil or latex primer. On previously painted surfaces, scrape, sand, then prime. Wire brush badly chalking areas. Dull glossy surfaces with gloss remover or sandpaper. Countersink nails and fill with putty. Caulk all cracks and joints. On unprimed, pre-primed or previously painted hardboard siding, prime with an exterior oil primer. On masonry, wire brush loose materials from chalky areas. On metal, remove rust on galvanized gutters and prime with a rust inhibitive primer. On new galvanized surfaces, allow to age six months before painting or clean with muriatic acid. On unpainted metal surfaces, remove rust, clean with mineral spirits and prime with a rust inhibitive primer. On vinyl siding, wash weathered vinyl siding thoroughly and allow to dry. Then paint with a color lighter than the original siding color. WARNING! Painting vinyl siding with darker colors will cause warping or deformation from heat absorption. CLEAN MILDEW FROM THE SURFACE! Mildew is a fungus that looks like dirt, but won't wash off. Mildew must be removed before painting or it will grow through any new coating. To remove mildew, scrub with a commercial mildew remover or a solution of 1 part liquid chlorine bleach to 3 parts water. Rinse thoroughly and allow to dry. Protect eyes and skin by wearing protective equipment, including rubber gloves and eye goggles when working with the bleach solution.

 
 
Product Details
Select a Product Detail type and download the PDF.
SDS Information
Find your Safety Data Sheet information for your Valspar products.
find it now
 
RELATED PRODUCTS
 
Valspar® Medallion®
Exterior Latex Primer
  • 100% acrylic resin for better durability than less expensive primers
  • House paints last longer over a high quality exterior primer
  • Soap and water clean up
  • Available at independent retailers
 
Learn More
 
Valspar® Medallion®
Tintable Exterior Primer
  • Three gray tones improve coverage of deep and bright colors
  • 100% acrylic formula assures superior adhesion
  • Less time and effort required
  • Interior/exterior
 
Learn More
Product Finder
We'll help you find what you need for your project.
Begin Searching
 
Locate a store
Retail Locator