Interior Products
 
Exterior Products
 
Small Projects
 
Stains
 
Concrete and Floor
Contractor Products
 
 
 
Search The Product Library
search now
 
 
 
Valspar® Porch, Floor & Patio
Latex Paint

Valspar® Floor and Patio Latex Paint protects floors with beautiful, rich colors. Glides on and dries quickly to a hard, smooth finish resisting scuffs, scrapes and scratches on interior and exterior wood and concrete floors.

  • Polyurethane-fortified enamel glides on ultra smooth and dries to a hard, satin or glossy finish
  • Non-glare, low-sheen finish stands up to the toughest indoor and outdoor conditions
  • Provides excellent color fastness
  • Available in most Valspar® colors
  • Easy to apply, easy soap and water cleanup
Features
Porch, Floor & Patio Latex Paint is an acrylic coating available in satin or gloss sheens for both interior and exterior applications. Polyurethane-fortified enamel glides on ultra smooth and dries to a hard finish. The versatile latex formula adheres to concrete, wood, and primed metal. Durable and weather-resistant, this enamel delivers long-lasting beauty and protection. Easy to apply and available in most Valspar® colors.
 
Where To Use

Ideal for use on properly prepared interior or exterior wood, concrete, and primed metal such as porches, patios, breezeways, and basement floors. Not for use on exterior wood decks, garage floors or other automobile parking areas.

 
Coverage
One gallon of paint covers up to 400 sq. ft. depending upon surface porosity. For surfaces that do require two coats, such as new concrete or badly worn areas, thin first coat only with 1 pint water per gallon of paint; apply second coat as normal.
Paint Calculator
 
Preparing Your Surfaces

The surface must be clean, dry and free of all loose, peeling or cracking paint. Thoroughly clean surface and remove wax and grease with an all-purpose cleaner (TSP or substitute), scouring powder, wax remover or diluted ammonia. Wire brush or scrape chipped or peeling paint. Rough or repaired wood surfaces should be sanded smooth. Prime bare, new wood with an enamel undercoater. Prime badly worn spots on old wood with a thinned first coat of Latex Porch and Floor Enamel. All rust must be removed from metal prior to painting. Prime all iron and steel with a rust inhibiting metal primer. Remove gloss from previously painted surfaces with gloss remover or by sanding. For new concrete, allow surface to cure at least 60 days before painting. Then, acid etch with muriatic acid (See etching instructions and read all cautions on etching packages). Unpainted or smooth-worn concrete should also be etched. After acid etching, apply two coats of Latex Porch and Floor Enamel - the first coat thinned with 1 pint water per gallon of paint.

 
 
Product Details
Select a Product Detail type and download the PDF.
SDS Information
Find your Safety Data Sheet information for your Valspar products.
 
 
Product Finder
We'll help you find what you need for your project.
Begin Searching
 
Locate a store
Retail Locator