Interior Products
Exterior Products
Small Projects
Concrete and Floor
Contractor Products
Search The Product Library
search now
Valspar® Latex Porch & Floor Paint

Valspar® Porch, Floor and Patio Latex Paint glides on and dries quickly to a hard, smooth finish.

  • Multipurpose
  • Water resistant
  • Suitable for interior and exterior uses
Valspar Latex Porch and Floor Paint is a satin-sheen coating that gives floors tough, long-lasting protection. The premium quality, 100% acrylic latex formula is ideal for indoor applications where fast dry is important. Can be lightly walked on as quickly as one hour, and takes regular foot traffic in 24 hours. Fast and easy water cleanup. This weather-resistant formula can be used indoors or outdoors, and gives years of long-lasting beauty and protection.
Where To Use

Properly prepared concrete, wood, porches, basement floors, stairs, breezeways, primed metal, indoor and outdoor floors. Not for use on garage floors or other automobile parking areas. Not for use on exterior wood decks.

One gallon covers up to 400 sq ft depending on surface porosity. Thinning is generally not recommended. However, when two coats are necessary, such as new concrete or badly worn areas, thin only the first coat with 1 pint water per gallon of paint.
Paint Calculator
Preparing Your Surfaces

The surface must be clean, dry and free of all loose, peeling or cracking paint. Thoroughly clean surface and remove wax and grease with an all-purpose cleaner (TSP or substitute), scouring powder, wax remover or diluted ammonia. Wire brush or scrape chipped or peeling paint. Rough or repaired wood surfaces should be sanded smooth.

Prime bare, new wood with an enamel undercoater. All rust must be removed from metal prior to painting. Prime all iron and steel with a rust-inhibiting metal primer. Remove gloss from previously painted surfaces with gloss remover or by sanding.

For new concrete, allow it to cure at least 60 days before painting. Then, acid etch with muriatic acid (see etching instructions and read all cautions on etching packages). Unpainted or smoothly worn concrete should also be etched. After acid etching, apply two coats of Latex Floor Enamel – the first coat thinned with 1 pint water per gallon paint. Prime badly worn spots on wood with a thinned first coat of Latex Floor Paint.

Product Details
Select a Product Detail type and download the PDF.
SDS Information
Find your Safety Data Sheet information for your Valspar products.
Product Finder
We'll help you find what you need for your project.
Begin Searching
Locate a store
Retail Locator